Specifications
- Structure: Twisted cable (OD 8 mm)
- Internal conductor (core wire): 1. Copper single wire not plated (φ 0.65 mm)
- Insulator: 2. EPE ― Expanded Poly-Ethylene
- Hull (Jacket): 3. Nylon Fabric / Braided Type
- Contact: Brass not plated, C-type φ 8 mm (tip 6 mm) or φ 10 mm (tip 9.5 mm)
- Banana plug: Gold plated, Minimum metal part (φ 4 mm) [NEW]
- Polarity: Red (hot, plus), black (cold, minus)
- Weight: 37 g including contact (in the case of standard 1.5 m long cable with C-type)
Caution for Use
Wire the speaker cable terminal according to the polarity of the stereo amplifier or the speaker and tighten it securely. Please note that if the wiring is not correct, the left and right sides will be in opposite phase and the sound image will not be localized near the center of the left and right speakers. Also, if the speaker cable terminal is accidentally short-circuited while the power is on, excessive current will flow to the output of the power supply, leading to a serious failure. Make sure to turn off the power before wiring. At that time, by wiring from the speaker side, such troubles can be avoided.
The length (measured from the center of the contact at both ends) responds to customer’s request and it will be produced in the range of 0.5 m to 4.0 m. In the case of stereo, please purchase two cables for the left and right channels.
