Audio-Technica Dual Moving Coil Cartridge AT33PTG/2


$ 539.95


The AT33PTG/II dual moving coil cartridge features a Microlinear stylus that, with its small curvature radius, delivers low-distortion, high-range performance, even when playing the inner circumference of a record. The Microlinear stylus, which has an average life span of around 1,000 hours, is mounted on a nude tapered boron cantilever with a double damper for reduced weight and better audio quality.

The cartridge’s two coils provide excellent channel separation and are affixed within a strong, lightweight mold made of hard resin to greatly reduce unwanted vibration. The cartridge uses a neodymium magnet and a permendur yoke for dramatically enhanced magnetic energy. The PCOCC (Pure Copper by Ohno Continuous Casting) coils ensure pure audio transmission.

Please Note: AT33PTG/2’s stylus assembly is not field-replaceable, but Audio-Technica offers a fee-based Moving Coil Exchange Program to properly service your moving coil cartridge.

  • Frequency Response    15-50,000 Hz
  • Channel Separation    30 dB (1 kHz)
  • Vertical Tracking Angle    23°
  • Vertical Tracking Force    1.8-2.2 g (2.0 g standard)
  • Recommended Load Impedance    More than 100 ohms (when head amplifier is connected)
  • Coil Impedance    10 ohms (1 kHz)
  • DC Resistance    10 ohms
  • Coil Inductance    22 µH (1 kHz)
  • Output Voltage    0.3 mV (at 1 kHz, 5 cm/sec)
  • Output Channel Balance    0.5 dB (1 kHz)
  • Stylus Shape    Microlinear
  • Cantilever    Gold-plated nude tapered boron
  • Static Compliance    40 x 10-6 cm/dyne
  • Dynamic Compliance    10 x 10-6 cm/dyne (100 Hz)
  • Mounting    Half-inch
  • Dimensions    16.0 mm (0.63") H × 16.6 mm (0.65") W × 26.5 mm (1.04") D
  • Accessories Included    Non-magnetic screwdriver; 2 washers; 2 nuts; cartridge
  • installation screws (13 mm × 2, 19 mm × 2); plastic protector; brush; PCOCC lead wire set
  • Mounting Feature    Half-inch mount
  • Stylus Curvature Radius    2.2 x 0.12 mil
  • Stylus Size    Nude square shank
  • Weight    6.9 g (0.24 oz)
  • Notes    Note: Moving coil cartridges require receivers or preamps with compatible inputs; their stylus assemblies are not field-replaceable.

    Share this Product